Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-23-2015, 02:49 PM   #41
stewwolfe
Senior Member
 
stewwolfe's Avatar
 
Join Date: Jun 2010
Location: North Chesterfield, VA
Posts: 299
Default Re: Dead 6V battery, 12V jump start with pos and neg wrong

Don't feel too badly about no gas, because most all of us have done it at one time or another. I just did it with my roadster the other day. I've been driving the cabriolet most of the winter and decided to fire off the roadster before I had a dead battery. Well it didn't start. I decided it was too cold to troubleshoot it right then and there so I left it for the night. The next morning I happened to notice a big 0 on the gas gage. Adding some fuel helped a lot, it started right up. Another favorite trick is to start the car and pull out only to have it die because I forgot to turn on the gas.
__________________
'31 40B
'31 68C
stewwolfe is offline   Reply With Quote
Old 03-23-2015, 02:51 PM   #42
DirtyDuck
Junior Member
 
Join Date: Mar 2015
Posts: 13
Default Re: Dead 6V battery, 12V jump start with pos and neg wrong

The gas gauge showed 1/2, but the tank was dry empty...
DirtyDuck is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-23-2015, 03:11 PM   #43
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,120
Default Re: Dead 6V battery, 12V jump start with pos and neg wrong

Key not turned on, gas not turned on, no gas. We've all done it at one time or another! Probably a lot more than any of us are ready to admit!
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Old 03-23-2015, 03:23 PM   #44
silversink
Senior Member
 
silversink's Avatar
 
Join Date: Nov 2011
Location: Dayton Oregon
Posts: 318
Default Re: Dead 6V battery, 12V jump start with pos and neg wrong

just a reminder.... the starter bolts are different lengths.....if you pull the starter again and it wont turn over change the bolts around.....don't ask how I know....took tree days to figure out
__________________
Hotrods don't have valve covers
silversink is offline   Reply With Quote
Old 03-23-2015, 08:59 PM   #45
Brentwood Bob
Senior Member
 
Join Date: May 2010
Location: brentwood, ca
Posts: 4,286
Default Re: Dead 6V battery, 12V jump start with pos and neg wrong

I like to call you efforts experience.
Drive the pickup, and enjoy it.
Bob
Brentwood Bob is offline   Reply With Quote
Old 03-24-2015, 12:42 AM   #46
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Dead 6V battery, 12V jump start with pos and neg wrong

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by silversink View Post
just a reminder.... the starter bolts are different lengths.....if you pull the starter again and it wont turn over change the bolts around.....don't ask how I know....took tree days to figure out
The three starter bolts should all be the same since they each fit the same flange and nothing else is held by any of them.
Tom Wesenberg is offline   Reply With Quote
Old 03-24-2015, 01:43 AM   #47
silversink
Senior Member
 
silversink's Avatar
 
Join Date: Nov 2011
Location: Dayton Oregon
Posts: 318
Default Re: Dead 6V battery, 12V jump start with pos and neg wrong

Quote:
Originally Posted by Tom Wesenberg View Post
The three starter bolts should all be the same since they each fit the same flange and nothing else is held by any of them.
I had one that was longer than the others that jammed the flywheel, it may have been replace
d some time in its existence
__________________
Hotrods don't have valve covers
silversink is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:33 PM.