The Ford Barn

Ryan · 11-09-2010, 08:28 AM

Made in 1933, this animation depicts the story of a Ford worker who goes home from work one car short of the production target and dreams that the outstanding unit is built by a fa... To read the rest of this blog entry from The Ford Barn, click here.

1936coupe · 11-09-2010, 08:46 AM

brilliant!!

nelsb01 · 11-09-2010, 09:02 AM

Film was made for showing at the Ford Building at the 1934 Chicago Worlds Fair. The car being built is a 1934 (check the hood -- two hood handles per side).

B Duncan · 11-11-2010, 09:51 PM

Thanks Ryan,

That was totally cool. Now if I could only have gotten my valves to go in that easy!

SUHRsc · 11-09-2010, 09:04 AM

Awsome... I wish that went on in my garage at night!

29 bones · 11-09-2010, 10:04 AM

Sponsored Links (Register now to hide all advertisements)

I liked it...even my kid sat on my lap early this morning at watched with me.....

Labold · 11-09-2010, 10:16 AM

That was a neat little movie. That little fairy sure makes putting a car together look easy. It would take me nearly twice as long to do the same job.

FL&WVMIKE · 11-09-2010, 10:54 AM

RYAN .........................
That was great ! I had never seen that before.
Thanks for posting it.
MIKE

FlatheadTed · 11-09-2010, 01:13 PM

Great little movie

Frank Miller · 11-09-2010, 01:21 PM

Entertaining and creative.

Lawson Cox · 11-09-2010, 03:34 PM

I think the "Bad Fairy" comes into my shop at night and messes things up. I KNOW I'm not that messy.

39coupe · 11-09-2010, 04:21 PM

What a cool little movie! Must have taken a lot of effort and talent to do all that in 1933. Thanks for sharing that with us Ryan.

jimalabam · 11-09-2010, 04:39 PM

Thanks Ryan, This is one I have not seen and it was good. Jim Langley...

Lawrie · 11-09-2010, 05:17 PM

Thanks Ryan for that,
We took our 34 coupe out in the pouring rain yesterday for coffee, when you think how long ago they were made ,and they still work and LOOK great.
Lawrie

Henry Hopper · 11-09-2010, 05:28 PM

Deja vu...

http://www.fordbarn.com/forum/showthread.php?t=19505

Mark Slight · 11-09-2010, 07:47 PM

Thanks Rayn, I was there in 1951 the year I started at the Henry Ford Trade School "T" section. Close to the Engine assembly building Rouge Plant Dearborn.
Mark W. Slight

Ken Crans · 11-09-2010, 08:39 PM

I love the flying Flathead! Ken

63fdsnr · 11-09-2010, 09:34 PM

Very cool, amazing history available - thanks.

4t64rd · 11-10-2010, 08:40 AM

I saw a movie once where this same thing happened to a '58 Plymouth... It didn't end as well.

bluardun · 11-10-2010, 09:21 AM

That was wonderfull---------Thanks for sharing it with all of us.
Bluardun

11-09-2010, 08:28 AM	#1
Ryan Administrator Join Date: Apr 2010 Location: Austin, TX Posts: 688	Rhapsody in Steel Made in 1933, this animation depicts the story of a Ford worker who goes home from work one car short of the production target and dreams that the outstanding unit is built by a fa... To read the rest of this blog entry from The Ford Barn, click here.

11-09-2010, 08:46 AM	#2
1936coupe Senior Member Join Date: May 2010 Location: london uk Posts: 114	Re: Rhapsody in Steel brilliant!!

11-09-2010, 09:02 AM	#3
nelsb01 Senior Member Join Date: May 2010 Location: Up North Posts: 870	Re: Rhapsody in Steel Film was made for showing at the Ford Building at the 1934 Chicago Worlds Fair. The car being built is a 1934 (check the hood -- two hood handles per side).

11-11-2010, 09:51 PM	#4
B Duncan Member Join Date: May 2010 Location: Easley, SC Posts: 51	Re: Rhapsody in Steel Thanks Ryan, That was totally cool. Now if I could only have gotten my valves to go in that easy! __________________ Brad Duncan

11-09-2010, 09:04 AM	#5
SUHRsc Senior Member Join Date: May 2010 Location: Harrisburg, PA Posts: 918	Re: Rhapsody in Steel Awsome... I wish that went on in my garage at night! __________________ -WANTED- CYLINDER HEADS 77-6050B, 81AS - 81SB - 99AS - 99SB - 19AS

11-09-2010, 10:04 AM	#6
29 bones Junior Member Join Date: May 2010 Posts: 25	Re: Rhapsody in Steel Sponsored Links (Register now to hide all advertisements) I liked it...even my kid sat on my lap early this morning at watched with me.....

11-09-2010, 10:16 AM	#7
Labold Senior Member Join Date: Jun 2010 Location: Bowling Green, Ky Posts: 109	Re: Rhapsody in Steel That was a neat little movie. That little fairy sure makes putting a car together look easy. It would take me nearly twice as long to do the same job.

11-09-2010, 10:54 AM	#8
FL&WVMIKE Senior Member Join Date: May 2010 Location: Daytona Beach, Fl & Spencer, W. Va, Posts: 4,449	Re: Rhapsody in Steel RYAN ......................... That was great ! I had never seen that before. Thanks for posting it. MIKE

11-09-2010, 01:13 PM	#9
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,755	Re: Rhapsody in Steel Great little movie __________________ http://www.flatheadted.com Flathead Ted brake Floaters ,

11-09-2010, 01:21 PM	#10
Frank Miller Senior Member Join Date: May 2010 Location: Auburn, MA Posts: 2,106	Re: Rhapsody in Steel Entertaining and creative. __________________ “The technique of infamy is to start two lies at once and get people arguing heatedly over which is true.” ~ Ezra Pound

11-09-2010, 03:34 PM	#11
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,119	Re: Rhapsody in Steel I think the "Bad Fairy" comes into my shop at night and messes things up. I KNOW I'm not that messy.

11-09-2010, 04:21 PM	#12
39coupe Senior Member Join Date: May 2010 Location: Weeki Wachee, Florida Posts: 133	Re: Rhapsody in Steel What a cool little movie! Must have taken a lot of effort and talent to do all that in 1933. Thanks for sharing that with us Ryan.

11-09-2010, 04:39 PM	#13
jimalabam Senior Member Join Date: May 2010 Location: Lee County Alabama Posts: 828	Re: Rhapsody in Steel Thanks Ryan, This is one I have not seen and it was good. Jim Langley...

11-09-2010, 05:17 PM	#14
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,729	Re: Rhapsody in Steel Thanks Ryan for that, We took our 34 coupe out in the pouring rain yesterday for coffee, when you think how long ago they were made ,and they still work and LOOK great. Lawrie

11-09-2010, 05:28 PM	#15
Henry Hopper Senior Member Join Date: May 2010 Location: N.W.England Posts: 439	Re: Rhapsody in Steel Deja vu... http://www.fordbarn.com/forum/showthread.php?t=19505

11-09-2010, 07:47 PM	#16
Mark Slight Senior Member Join Date: May 2010 Location: Dixon, CA Posts: 473	Re: Rhapsody in Steel Thanks Rayn, I was there in 1951 the year I started at the Henry Ford Trade School "T" section. Close to the Engine assembly building Rouge Plant Dearborn. Mark W. Slight

11-09-2010, 08:39 PM	#17
Ken Crans Senior Member Join Date: May 2010 Location: Highland,MI Posts: 1,196	Re: Rhapsody in Steel I love the flying Flathead! Ken

11-09-2010, 09:34 PM	#18
63fdsnr Junior Member Join Date: May 2010 Posts: 3	Re: Rhapsody in Steel Very cool, amazing history available - thanks.

11-10-2010, 08:40 AM	#19
4t64rd Junior Member Join Date: May 2010 Location: Largo, FL Posts: 6	Re: Rhapsody in Steel I saw a movie once where this same thing happened to a '58 Plymouth... It didn't end as well.

11-10-2010, 09:21 AM	#20
bluardun Senior Member Join Date: May 2010 Location: Tucson, Az. Posts: 330	Re: Rhapsody in Steel That was wonderfull---------Thanks for sharing it with all of us. Bluardun

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode