The Ford Barn

Shawn · 09-27-2010, 01:36 PM

Hi out there, and thank you for looking. This is a copy of a kurtis track nose I have made. It is made fron 3003 H14 aluminum and .063 in thickness . It was made from six pieces. The rear of the nose has a step down bead for the hood to rest flush. The nose hole opening also has a step down bead, so a grill can rest flush .

ROBERT JAM · 10-06-2010, 08:12 PM

Sponsored Links (Register now to hide all advertisements)

pm to you

09-27-2010, 01:36 PM	#1
Shawn Junior Member Join Date: Sep 2010 Posts: 9	Kurtis Aluminum Track Nose. City: San Jose State: California Price: 450.00 Hi out there, and thank you for looking. This is a copy of a kurtis track nose I have made. It is made fron 3003 H14 aluminum and .063 in thickness . It was made from six pieces. The rear of the nose has a step down bead for the hood to rest flush. The nose hole opening also has a step down bead, so a grill can rest flush . Last edited by Shawn; 02-19-2011 at 02:49 AM.

10-06-2010, 08:12 PM	#2
ROBERT JAM Member Join Date: Jun 2010 Posts: 53	Re: Kurtis Aluminum Track Nose. Sponsored Links (Register now to hide all advertisements) pm to you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode