|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
09-25-2014, 08:56 AM
|
#7 |
|
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Clutch pressure plate help
A piece of aluminum channel threaded for a bolt and lock nut makes adjusting the fingers easy. I set the bolt for a depth of 5/8" to 11/16", lock the nut and then use a thin feeler, such as .010" to feel each arm for a slight drag when it's properly adjusted.
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 10:35 AM.