Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)
Reload this Page Help with this 8BA

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-09-2014, 11:15 AM   #6
Richardtx
Member
 
Join Date: May 2010
Posts: 48
Default Re: Help with this 8BA
Sponsored Links (Register now to hide all advertisements)
You can identify the front and center main bearing caps by.....the front cap will always have a little bump cast on the cap about 1/8". Also, the bolt holes will be centered on center cap. The bolt hols will be a liitle off-center on front cap. If rod caps are not marked, look at the matching machine marks when rod was honed. Sometimes you can see where the lines match up.
Richardtx is offline   Reply With Quote
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Threaded Mode Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:35 AM.