Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)
Reload this Page T-5 to flathead won't shift into gear with engine running.

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-17-2014, 03:04 PM   #1
35topdown
Member
 
Join Date: May 2011
Location: Texas
Posts: 40
Default Re: T-5 to flathead won't shift into gear with engine running.
Your bronze bushing might be the problem. It has no lubricating properties. You need an oilite bushing. It is oil impregnated and is the material that OEM bushings are made from. The bronze will gall up on the shaft and grab it keeping it turning.
35topdown is offline   Reply With Quote
Old 08-17-2014, 08:20 PM   #2
Init1
Senior Member
 
Init1's Avatar
 
Join Date: May 2010
Location: Oregon City, Oregon
Posts: 208
Default Re: T-5 to flathead won't shift into gear with engine running.
Quote:
Originally Posted by 35topdown View Post
Your bronze bushing might be the problem. It has no lubricating properties. You need an oilite bushing. It is oil impregnated and is the material that OEM bushings are made from. The bronze will gall up on the shaft and grab it keeping it turning.
It is an oilite bush from Speedy Bill.
Init1 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:23 PM.