Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-18-2013, 03:43 PM   #5
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 18,011
Default Re: 1939 Hydraulic Brake Drum

A person also has to know if it has an inny type hub (mounted inside the drum) or an outy type hub (mounted outside the drum) on the 40 thru 48 type brake drums since both were employed and mixed. The early wide 5 drums are getting harder to find now days. The early type wire wheel drums are also getting harder to find. A person has to adapt the wire wheels to the later type drums but it's not too big a deal. It seems like the 33s had the open drums. You can't mistake those type.

A picture might answer all of these unknowns.
rotorwrench is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:25 PM.