Distributor is stuck

[davis57ford]

I used pb blaster for qabout a week straight while driving it 2-3 times a day took a piece of oak wood about 1 inch by 12 inches and kept taping on it with a dead blow and it finally broke loose, good luck!

[Pamlico]

If you are just installing the Pertronix kit, there is no need to pull the distributor.

[JoeGermann]

You might find that making a 50/50 mix of ATF and Acetone will work a LOT better than PB blaster or any other similar product. The key is patience and a BIG hammer. (just kidding about the hammer)

Good luck,
Joe

[parklane]

Originally Posted by JoeGermann

You might find that making a 50/50 mix of ATF and Acetone will work a LOT better than PB blaster or any other similar product. The key is patience and a BIG hammer. (just kidding about the hammer)

Good luck,
Joe

Ya, that stuff works better than anything else I've ever tried. Cheaper too.