The Ford Barn

PC/SR · 05-10-2013, 05:05 PM

Cling's has the adapter. https://www.clingsaftermarket.com/addtocart.asp?prod=43
Fairly easy job to do.
There are different gear sets and interchangable parts combinations. The later synchros will fit the earlier gearsets and cases, etc. VanPelt Sales website has lots of good info. http://www.vanpeltsales.com/FH_web/f...sID_3speed.htm
I like the 37-38 gearset which has a little higher ratio than the Model A. My engine is not stock and I use a 3.54 rear end. Very nice for touring. Others will have opinions.

05-10-2013, 05:05 PM	#5
PC/SR Senior Member Join Date: May 2010 Location: Santa Rosa, CA Posts: 1,285	Re: Anyone running a 3spd from a V-8 car? Cling's has the adapter. https://www.clingsaftermarket.com/addtocart.asp?prod=43 Fairly easy job to do. There are different gear sets and interchangable parts combinations. The later synchros will fit the earlier gearsets and cases, etc. VanPelt Sales website has lots of good info. http://www.vanpeltsales.com/FH_web/f...sID_3speed.htm I like the 37-38 gearset which has a little higher ratio than the Model A. My engine is not stock and I use a 3.54 rear end. Very nice for touring. Others will have opinions. Last edited by PC/SR; 05-10-2013 at 05:10 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode