|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
|
Thread Tools | Display Modes |
|
|
|
|
#1 |
|
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 9,240
|
Give us a clue - what sort of carb does it have on it? Anything could have been fitted over the years.
Is there any reason the stock type gaskets won't work? Mart. |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Waxahachie, Texas
Posts: 241
|
What kind of engine is it? Usually if it's a V8 one bank is stock and runs and other is an air compressor which may use a stock gasket too.
It's always worthwhile to gather all information from plates or decals on a system then go to the manufacturer. Call them first. When I was working on my Hobart welder the Miller company (Which bought Hobart) directed me to their web page which had a forum like this one. I got all the answers and some parts. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|