|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
10-18-2012, 03:55 PM
|
#15 |
|
Senior Member
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,087
|
Re: Mitchell in our 46
40CPE
Here is how it works: The 26% (it is actually 26.6) mitchell reduces the rpm,s by 26% at the same speed when shifted from direct drive to overdrive. So, 100% minus 26% equals 74%. If you are turning 2,900rpm's @ 60mph and shift into overdrive the rpm's will drop to 2150 (2900*.74=2150). John |
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 12:27 AM.