The Ford Barn

28RPU · 08-29-2011, 07:23 PM

I can't remember, is a Y-Block flywheel unique or can you use it on another engine?

46yblock · 08-30-2011, 09:35 AM

What I remember is not ever hearing of anyone using it on another engine, either 6 or V-8.

Ford blue blood · 08-30-2011, 10:55 PM

Y-blocks are internally balanced so it will swap to any other Y-block....I think.

46yblock · 08-30-2011, 11:58 PM

Quote:

Originally Posted by Ford blue blood

Y-blocks are internally balanced so it will swap to any other Y-block....I think.

Correcto Mundo...

darrell · 08-31-2011, 10:57 AM

all y block and 223.

49merclover · 09-11-2011, 05:43 PM

Sponsored Links (Register now to hide all advertisements)

you have to drill new holes.too

Retro Jim · 09-16-2011, 11:32 PM

I have a good , ready to use standard flywheel with a good starter ring that has already been resurfaced . It's very heavy but can ship for you . I am also going to be at the HAMB drags at Beaver County Drag way in Pa. on OCT 1 if you are coming and need the flywheel . I will be glad to bring it with me . The flywheel is $80 plus shipping .

Jim

28RPU · 09-17-2011, 09:15 AM

Quote:

Originally Posted by Retro Jim

I have a good , ready to use standard flywheel with a good starter ring that has already been resurfaced . It's very heavy but can ship for you . I am also going to be at the HAMB drags at Beaver County Drag way in Pa. on OCT 1 if you are coming and need the flywheel . I will be glad to bring it with me . The flywheel is $80 plus shipping .

Jim

Thanks, but I don't need one. I have one and was wondering if I should keep it for something later on other than a Y block engine.

Retro Jim · 09-17-2011, 12:48 PM

Only good for a Ford Y Blocks , but I would hang onto it if it's a good one ! You never know when you might need it !

Jim,

Ray With · 09-22-2011, 08:57 AM

You cant use it on any thing but a Y block in its stock configuration.

George G · 02-11-2012, 08:03 PM

They don't interchange with a flathead??

Ole Don · 02-12-2012, 10:29 AM

Quote:

Originally Posted by George G

They don't interchange with a flathead??

A flat head flywheel has four bolts and two good sized dowels. A Y block flywheel has six bolts, but the holes are offset just a little so the flywheel only fits on one way.

08-29-2011, 07:23 PM	#1
28RPU Senior Member Join Date: May 2010 Location: South central Tenn Posts: 375	Y-Block flywheel I can't remember, is a Y-Block flywheel unique or can you use it on another engine?

08-30-2011, 09:35 AM	#2
46yblock Senior Member Join Date: Jul 2011 Location: S. Oregon Posts: 304	Re: Y-Block flywheel What I remember is not ever hearing of anyone using it on another engine, either 6 or V-8. __________________ Mike, S. Oregon 46 Ford 1/2 ton, '62 Merc Meteor S33, '54 Ford 600 tractor, '64 Falcon Futura, 1960 Thunderbird

08-30-2011, 10:55 PM	#3
Ford blue blood Senior Member Join Date: Jul 2011 Location: Birmingham, AL Posts: 903	Re: Y-Block flywheel Y-blocks are internally balanced so it will swap to any other Y-block....I think. __________________ Bill, certified Ford nut. 2024 F-150 2018 Lincoln MKZ 2016 Focus 1961 Comet S-22 1956 Ford Crown Victoria 36 Chevy, 351C/FMX, 8", Mustang II

08-31-2011, 10:57 AM	#5
darrell Senior Member Join Date: Dec 2010 Location: p.e.i. Posts: 1,065	Re: Y-Block flywheel all y block and 223.

09-11-2011, 05:43 PM	#6
49merclover Senior Member Join Date: May 2010 Posts: 199	Re: Y-Block flywheel Sponsored Links (Register now to hide all advertisements) you have to drill new holes.too

09-16-2011, 11:32 PM	#7
Retro Jim Senior Member Join Date: May 2010 Location: Abbottstown , Pa. Posts: 194	Re: Y-Block flywheel I have a good , ready to use standard flywheel with a good starter ring that has already been resurfaced . It's very heavy but can ship for you . I am also going to be at the HAMB drags at Beaver County Drag way in Pa. on OCT 1 if you are coming and need the flywheel . I will be glad to bring it with me . The flywheel is $80 plus shipping . Jim

09-17-2011, 12:48 PM	#9
Retro Jim Senior Member Join Date: May 2010 Location: Abbottstown , Pa. Posts: 194	Re: Y-Block flywheel Only good for a Ford Y Blocks , but I would hang onto it if it's a good one ! You never know when you might need it ! Jim,

09-22-2011, 08:57 AM	#10
Ray With Senior Member Join Date: Jul 2011 Location: Montgomery,Texas Posts: 115	Re: Y-Block flywheel You cant use it on any thing but a Y block in its stock configuration. __________________ Hotrodchat's Picture Gallery 26,000 pictures to keep you looking

02-11-2012, 08:03 PM	#11
George G Member Join Date: May 2010 Location: Stony Plain Alberta Posts: 96	Re: Y-Block flywheel They don't interchange with a flathead?? __________________ Mmmm Mmmm Grandma's cookin'

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode