Which Model A vendor has the best 21” inner tubes?

[Fullraceflathead]

I’m currently wanting to mount my new Firestone tires. My current tires and tubes are 50+ years old! I’m looking at Snyder’s tubes are these considered currently the best available? These are Firestone bias ply tires.

[Synchro909]

On a recent rally, a friend had 14 tube failures in 10 days with those Chinesium things. Seems we are back to the horrible days of 2013 when a decent tube was a fantasy.
On the plus side, I am reliably told that Michelin tubes are fantastic, even if a little "spendy"

[old ugly]

i don't know the answer to the op's question.
what i do know is i just bought 6 tubes, one has failed before i could drive the car.
i have 50 something year old tubes in 2 tires and they have never gave any greef.

i think it is a gamble.

[KMBeers]

My tubes came from Snyder’s, about 2 years ago installed under a set of Firestone tires. I have about 1800 miles on them and they are working fine.

[Fullraceflathead]

Thanks for the input guys it looks like I'll place my order with Snyder's and hang on to my existing tubes as backups!!!

[Bob-A]

Sponsored Links (Register now to hide all advertisements)

When Bratton's was selling out I got 5 of their 19" tubes for half price. Supposedly the best you could get. Made without recycled rubber. At present they are stored in a cool dry place.


Bob-A


"Skirts are for Women not Car Fenders"

[Tacoma Bob]

Got my radial tubes from Snyders. Two flats in the first 800 miles. I bought Hartford tubes from Coker I believe. No issues. I threw the remaining tubes in the garbage. My understanding is Hartford tubes are also Chinese made. Just holding them you can tell the difference in Quality.

[Big hammer]

Make sure there are no stickers inside of your tires, use a bright light and look carefully, remove any stickers, i spent about an hour scraping stickers on 5 new tires. I only have to add air once a year !

[Y-Blockhead]

Originally Posted by Big hammer

Make sure there are no stickers inside of your tires, use a bright light and look carefully, remove any stickers, i spent about an hour scraping stickers on 5 new tires. I only have to add air once a year !

The American Classic were good for this. They put small stickers that were very difficult to remove. Even the best tubes will not hold up against them.

[Brad in Germany]

Originally Posted by Bob-A

When Bratton's was selling out I got 5 of their 19" tubes for half price. Supposedly the best you could get. Made without recycled rubber. At present they are stored in a cool dry place.

Bob-A

LOL, I did the same from Brattons when they sold off their remaining inventory at 50% off. I bought a case of them (in both tire sizes) so that I would have new inner tubes for all of my Model A's. I have used a couple of them and had no problems (even replaced the original rubber valve stems with the era correct metal Schrader ones).

They were delivered to me new in their original shipping box which indicates that they were "Made in Vietnam".

Brad in Maryland



.

[Y-Blockhead]

I have had good luck with tubes from Lucas Classic Tires in Long Beach. Made in Vietnam.

[mhsprecher]

I have Hartford tubes from Coker in my radials. No problems since I removed the stickers from inside the tires, which was a couple of years and a couple of thousand miles ago.

[Fullraceflathead]

Snyder's does state that their tubes are made from 100% butyl rubber nothing recycled.