|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
|
|
#10 |
|
Senior Member
Join Date: May 2010
Location: Rhode Island
Posts: 661
|
You made me curious so I measured the bores with calipers, and they are all .080 over. Apparently the machine shop just stamped one of the pistons and didn’t bother with the other three.
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|