|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
04-25-2026, 03:53 AM
|
#19 |
|
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 6,856
|
Re: Can't Get Hub On
I have used a Dremal sanding drum to remove high spots on the shoes. Others have used electric belt sanders. Others have used the self adhesive 80 grit sanding paper and attached this to the drum and then rotated the drum on the shoes. Others just let the shoes wear into the drums through use.
The best way is to send the shoes and drums to Randy Gross.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 03:00 AM.