The Ford Barn

jimTN · 03-04-2026, 04:12 PM

Just set it to where it starts best an runs best, simple as that. You do not need a fancy tool, only a screwdriver.

Sid · 03-04-2026, 04:45 PM

I know that. This is for after you install new points and do the initial timing set up. I have done it the old school way measuring from the bolt hole. This looks like it can make it just a little easier.

03-04-2026, 04:12 PM	#1
jimTN Senior Member Join Date: May 2010 Location: Powell, TN Posts: 2,645	Re: 2 Bolt distributor initial timing aid Just set it to where it starts best an runs best, simple as that. You do not need a fancy tool, only a screwdriver.

03-04-2026, 04:45 PM	#2
Sid Senior Member Join Date: May 2010 Location: Rathdrum Idaho Posts: 780	Re: 2 Bolt distributor initial timing aid I know that. This is for after you install new points and do the initial timing set up. I have done it the old school way measuring from the bolt hole. This looks like it can make it just a little easier.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode