“Correct” fan belt doesn’t fit

[rockfla]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by glennpm

With your engine exposed like this you can pretty easily figure out the belt length that you need.

- Make a mark on your crank pulley and the belt in the straight down position
- Hold the belt in place there
- Pull the belt over the generator pulley, straight up position and make another mark
- Take the belt off, measure between your marks and double the value
- Look for the next longer belt but shoot for around maybe 1" or 1-1/2" longer

AND paint it back Ford Green IF you so desire