Grille shell emblem ID

[deuce lover]

Originally Posted by drfromnc

Thanks. Just posted pic of back side

Take the nut of and compare the base of the stud and see if matches to a pic of one I sent. The orig 33 has a square base ,34's like 32's are round.Many of the early repros just had a screw soldered on. No originals had part numbers on back,just makers or vendor mark. The correct emblem for your application should be approx 2 1/8 " wide across the front.The 34's approx 1 7/8" or a bit less. Looking at the curve of yours it appears '34 which was more pronounced .35'56 had a curve like the '34 but had a clip on the back.