32 gas gauge sending unit, not working

[oldford]

I got it working. I removed the sender, cleaned it and made sure all the orifices were open. I make a test stand where i filled a bottle with about 4" deep of gas. Put the sender in and gauge show about 3/4 full so I removed a little of the red fluid and now the gauge reads about 1/2 full. May remove a little more tomorrow as I do not want it to over run. Right now it's sitting in the stand. Going to see if it holds same reading over night. Thanks everyone for your help. I think these little gauges are the neatest thing ford ever came up with, ie when they are working.