Go Back   The Ford Barn > General Discussion > Model T (1909-1927)
Reload this Page Model at stuck Bendix

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-29-2025, 12:05 PM   #4
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 18,011
Default Re: Model at stuck Bendix
Pull the starter first if you haven't already. This will allow the flywheel to turn if nothing else is wrong. Do easy things first. Pull plugs and look in cylinders if you can. The clutch in the transmission is what decouples the drive to allow hand cranking. If it won't turn and it's not the engine then the transmission is the next check. With the hogs head off a person can look in there.
Last edited by rotorwrench; 03-29-2025 at 12:23 PM.
rotorwrench is offline   Reply With Quote
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Threaded Mode Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:08 PM.