9" rear in a jailbar truck

[flatford8]

Originally Posted by 51504bat

Don't know where the third member is coming from but Fastenal doesn't ship east to west or west to east. I believe the dividing line is the Mississippi River or there abouts. But it's been a while since I checked with Fastenal about shipping so things may have changed.

The motor I shipped went from Maine to Texas…… can’t go much further west than that from here….. Mark

[51504bat]

Originally Posted by flatford8

The motor I shipped went from Maine to Texas…… can’t go much further west than that from here….. Mark

Direct from the Fastenal web site:

The key is consistency. Because 95% of our routes are static (trucks running fixed routes through the night to service our branches and customers), we’re able to provide consistent service and control transportation costs.

Fastenal does not currently offer shipping between East and West Zones as shown on below map.

Fastenal does not offer transportation services between the US and Canada.

[GB SISSON]

I looked at fedex site.... 150 lbs. With 20' of perforated steel strapping in the box, some could be used to loop over it in the box and screw down to floor, which is 1" plywood. Yes, cardboard where it fits too and I think he's gonna bolt the yoke through the box side.

[flatford8]

Originally Posted by 51504bat

Direct from the Fastenal web site:

The key is consistency. Because 95% of our routes are static (trucks running fixed routes through the night to service our branches and customers), we’re able to provide consistent service and control transportation costs.

Fastenal does not currently offer shipping between East and West Zones as shown on below map.

Fastenal does not offer transportation services between the US and Canada.

Well, there ‘ya go……I thought if you went past Texas, you dropped off the edge…….that never came up when I was dealing with them so I just figured they went right to the coast.Thanks! I’ll remember that for future reference ….I guess this is why I don’t sell many big things……..Mark