37 coupe RTS T-170 swap!

[ronzmtrwrx]

I had to weld up the rear mount area on the tailhousing and re drill and tap it, so I could narrow it enough to where it would slide backwards into the open area to clear the clutch. Of course that means extending the trans cover rearward so the trans can come out.

[petehoovie]

Originally Posted by ronzmtrwrx

I had to weld up the rear mount area on the tailhousing and re drill and tap it, so I could narrow it enough to where it would slide backwards into the open area to clear the clutch. Of course that means extending the trans cover rearward so the trans can come out.