Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Distributor Locking Screw, HELP!

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-16-2024, 09:54 PM   #1
lrf
Senior Member
 
Join Date: Jun 2019
Location: long beach ca
Posts: 230
Default Re: Distributor Locking Screw, HELP!
And don't over tighten the screw that pushes against the distributor, it can crack the base of the distributor, the jam-nut will hold the screw in place. LRF
lrf is offline   Reply With Quote
Old 02-16-2024, 11:41 PM   #2
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 6,039
Default Re: Distributor Locking Screw, HELP!
Quote:
Originally Posted by lrf View Post
And don't over tighten the screw that pushes against the distributor, it can crack the base of the distributor, the jam-nut will hold the screw in place. LRF
This is a very important piece of info.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:29 AM.