T5 advice

[32coupe]

Originally Posted by Ziggster

Not sure what you are referring to? Could you please clarify? When I went down the road I did, I contacted MDL, Speedway, Hanlon Motorsport, and posted on here and the HAMB IIRC with regards to my dilemma of using a Ford T5 with the early Ford TO bearing. The only solution suggested by all was to use a sleeve on the bearing retainer/TO hub.

Here is a pic of Garys (cornhuskers kit) look at the throw out bearing. He presses a sleeve in the throwout bearing hub that fits on the T5 bearing retainer rather than pressing a sleeve on the bearing retainer to fit the early ford throwout bearing.