Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-17-2023, 04:43 AM   #39
aussie merc
Senior Member
 
aussie merc's Avatar
 
Join Date: Sep 2016
Location: sydney australia
Posts: 1,156
Default Re: Help… engine skips after driving 30 minutes.

cant argue with the original dissy but if you want electronics then you must upgrade the electrics to suit and its all about a smooth constant supply and absolutely as near as perfect earths .Your cars wiring system was designed 30years before transistors and now you want to enter the space age . It can be done and is often quite successful ; Dig deep into all the installation paperwork you can find, for whatever system you choose [IE not listed with but required by mallory a 611 power cell and the inline power filter ]. Most failures can be traced to ether wear in a related component [dissy cam lobes] or incorrect install .Even something as simple as connecting an earth or power in the wrong spot can reek havoc ,read the directions 3 times/ think and then reread then if any doubts contact the manufacturer most are more than willing to help
aussie merc is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:11 AM.