Carburetor or Fuel Pump Issue

[Bill OH]

Install an electric fuel pump at the tank operated by a switch on the dash, which in turn is connected to the ignition side of the ignition switch. Using longer carb studs, put 5 carb to manifold gaskets under the carb. Prevents heat soak into the carb.I no longer have the hard start problems. It has not been discussed, but is the line from the tank to the fuel pump good or does it have holes - turning on the electric fuel pump at the tank will show a defective gas line. I installed a 5/16ths copper line in 1988 and no problems. I used a neoprene gasket on the mechanical fuel pump filter bowl - cork can develop an air leak.