The Ford Barn

BUBBAS IGNITION · 10-05-2022, 01:50 PM

Quote:

Originally Posted by 35fordtn

Run a 3.0 Ohm coil. It's safer on your petronix uni, will produce less heat. Epoxy filled coil will be best.

AMEN AMEN AMEN Mike

BUBBAS IGNITION · 10-05-2022, 02:10 PM

Tubman was too nice and didnt want to say ????
The pertronixs coil is a piece of off shore chinese shit ! They buy them 1-2000 at at time and the failure rate is approx 35%.!!!
IF you get a good one you are in the 65 %.
Their electronic ignition will work very well (If the defective coil didnt damage it )
Use the bosch blue # 00012 its 3-4 ohms and i have never seen a defective one ..................

10-05-2022, 02:10 PM	#2
BUBBAS IGNITION Senior Member Join Date: May 2010 Location: SPEEDWAY INDIANA Posts: 4,148	Re: My COIL EXPLODED Tubman was too nice and didnt want to say ???? The pertronixs coil is a piece of off shore chinese shit ! They buy them 1-2000 at at time and the failure rate is approx 35%.!!! IF you get a good one you are in the 65 %. Their electronic ignition will work very well (If the defective coil didnt damage it ) Use the bosch blue # 00012 its 3-4 ohms and i have never seen a defective one .................. __________________ If it Makes Spark, we do it !!!! www.bubbasignition.com [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode