|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
10-10-2021, 02:43 PM
|
#13 |
|
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 6,855
|
Re: 6 volt Spartan horn on 12 volt system
I just rewound the horn field coils as per Tom Endys instructions. Horn works great. I somehow got the magnetic polarity wrong on one side but I just had to switch the wires around from the brush to the connector on one side. I greased the cam and cam follower which were dry. The lack of grease caused some wear. I had to dress the follower with my Dremel grinder.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 04:10 PM.