The Ford Barn

Dave in MD · 05-24-2021, 01:07 PM

The Model A Ford Restoration and Maintenance Handbook Volume two by Paul Moller has some good information on these early generators. There are two ball bearings inside and the replacements being sold by some of the vendors are sealed. You may want to check the brushes as both five and three brush units were used. The commutator should also be checked.
Dave

marty in Ohio · 05-24-2021, 03:02 PM

Good answers all. Thanks a million guys.
Marty

05-24-2021, 01:07 PM	#1
Dave in MD Senior Member Join Date: May 2010 Posts: 180	Re: Powerhouse Generator The Model A Ford Restoration and Maintenance Handbook Volume two by Paul Moller has some good information on these early generators. There are two ball bearings inside and the replacements being sold by some of the vendors are sealed. You may want to check the brushes as both five and three brush units were used. The commutator should also be checked. Dave

05-24-2021, 03:02 PM	#2
marty in Ohio Senior Member Join Date: May 2011 Location: Elyria, Ohio Posts: 821	Re: Powerhouse Generator Good answers all. Thanks a million guys. Marty

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode