clutchplate just fits the flywheel, or not ??

[Kurt in NJ]

Every time I look at the pictures it seems that the inner diameter of the disc looks large, what looks like a wear pattern on the flywheel looks smaller than the lining on that disc,

[aussie merc]

also this will allow them to reset the pressure plate to the correct height so you can adjust the clutch correctly

[34 GAZ]

Originally Posted by Kurt in NJ

Every time I look at the pictures it seems that the inner diameter of the disc looks large, what looks like a wear pattern on the flywheel looks smaller than the lining on that disc,

Flywheel has,nt been used after the polishing. That blueish colour is thin coat of hamerite to protect from surface rust where there is no contact from the disc.



Lots of good answers from everyone, thanks.