The Ford Barn

geoford41 · 12-20-2020, 09:42 AM

I just had (Oct) the 1940 Coupe body in my Avatar "dustless blasted" (while on the frame) on the outside sheet metal and had rear pan and Quarter panels replaced we did not touch the inside. The inner metal and underside were replace by prior owner so no need to remove body. Being painted now hope to have back in early 2021

md8810 · 12-20-2020, 10:22 AM

I have not had occasion to try this myself. Tar based undercoating, when frozen with dry ice becomes brittle and can be shattered and easily removed. Has anyone tried this process?

12-20-2020, 09:42 AM	#1
geoford41 Senior Member Join Date: Oct 2013 Location: Delaware Posts: 160	Re: Media Blasting 40 Body I just had (Oct) the 1940 Coupe body in my Avatar "dustless blasted" (while on the frame) on the outside sheet metal and had rear pan and Quarter panels replaced we did not touch the inside. The inner metal and underside were replace by prior owner so no need to remove body. Being painted now hope to have back in early 2021

12-20-2020, 10:22 AM	#2
md8810 Senior Member Join Date: May 2010 Location: North San Diego area Posts: 100	Re: Media Blasting 40 Body I have not had occasion to try this myself. Tar based undercoating, when frozen with dry ice becomes brittle and can be shattered and easily removed. Has anyone tried this process?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode