NEW products available thread

[Karl Wescott]

1937 hood latch cam. 78-16628.


Original on right, finished repro in middle, cutout blank on left.


I had the cutout blanks laser cut which allows me to hand form and weld up to make the finished part without expensive tooling.

[35fordtn]

A simple one; yet one I needed recently. now available 11A-16925 1941-51 Ford hood latch dowel spring.

https://thirdgenauto.com/product/194...-dowel-spring/

IMG_9646_InPixio.jpg

[35fordtn]

These won’t be available until middle of February. But for the 32 guys a perfect reproduction of the transmission cover and dual temp gauge face are coming and both will be very very reasonably priced.






Sent from my iPhone using Tapatalk

[Karl Wescott]

Just back from the polisher:


1941-48 convertible visor arms. 304 stainless and polished. The mounting end is modified to use a "C" clip rather than being riveted as original. I have the springs also available.

[Karl Wescott]

Also back from the polisher:


Late 1939-1940 convertible visor arms. 304 stainless and polished. Spring is available. Carpenter had been making these but discontinued them about a year ago.

[Karl Wescott]

Sponsored Links (Register now to hide all advertisements)

Yep, the polisher has been busy...


Late 1935-1936 Roadster/Phaeton windwing brackets. Investment cast 304 stainless and polished. Kit will include hardware as shown.

[35fordtn]

Excellent work Karl!

[DavidG]

Karl,


Good show; right down to the correct lock nuts. Will you offer the rubber inserts to retain the glass?

[Karl Wescott]

No rubber inserts at this time, Carpenters are slightly off. There is some emerging technology to 3D print elastic materials at a reasonable price... but not affordable to me yet. The lock nuts are a commercial stainless nylock... that happens to look like the original.

[95476]

Michael, you have to make the dual temp gauge faces for the 33/34 gauges. I have 6 of them that need face restoring.

[msstring]

I see that you have visor arms, do you have the bracket? I broke mine.

Sent from my SM-G973U using Tapatalk

[40larry]

Originally Posted by 35fordtn

A simple one; yet one I needed recently. now available 11A-16925 1941-51 Ford hood latch dowel spring.

https://thirdgenauto.com/product/194...-dowel-spring/

Attachment 448274

Michael
I have about a dozen of the 11A cups that go with your 11A dowel and spring if you are interested. 40larry

[materguru]

Hello all
Does anyone know where to find the seal for a 1932 Ford Cabriolet header bow? Drake has quit making them. Realized too late that I should have snagged one. Insight appreciated.

[TomT/Williamsburg]

Check with Drake suppliers - they may have some stock. Try Joe’s Antique Auto Parts. Nice folks to deal with .....

Good luck ....

[35fordtn]

Another simple item that is newly available.
Spring shackle bar for 32-40 fords made exact as original, with the correct shape.



Sent from my iPhone using Tapatalk

[Zeke3]

Michael, excellent looking shackle bars. Thank you

[40larry]

Originally Posted by 35fordtn

Another simple item that is newly available.
Spring shackle bar for 32-40 fords made exact as original, with the correct shape.










Sent from my iPhone using Tapatalk

Did you stamp the letter "M" on them like the originals??
40larry

[DavidG]

The M only appeared on the forged version and only on those supplied by Moore Drop Forgings, which were in a minority of the originals that I've seen, NOS or used.

[maineford]

Can we buy directly from you or eBay only?

[35fordtn]

We sell on ebay, but prices are a bit higher as is shipping on there. Best to call direct, or use thirdgenauto.com