Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-08-2020, 06:41 PM   #1
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,773
Default Re: Dope trying to dope out a signal light issue

Good clean grounds first. For some reason I have found that the 41-48 cars definitely need really good clean grounds. I have even added a ground strap to the housing stud that protrudes into the back side of the fender. If you have a stock wiring harness also check all the bullet connectors at the back . Take them apart and clean them with sand paper and a round file in the tube encased in the rubber.
TJ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:38 AM.