Front Engine Mount Post Length

[jharrellh]

Curious how long the threaded post should be on a front engine yoke. I suspect mine may have been sheared off and filed, since it seems a little short and has no cotter pin hole. It was mounted with rubber donuts, replacing with the proper spring mount. Thanks!

[Garagekulture13]

Looks like right at 2"

Sent from my SM-N950U using Tapatalk

[Gary WA]

Originally Posted by jharrellh

Curious how long the threaded post should be on a front engine yoke. I suspect mine may have been sheared off and filed, since it seems a little short and has no cotter pin hole. It was mounted with rubber donuts, replacing with the proper spring mount. Thanks!

I have some with cotter key holes some without but approximately all are close to 2"+-

[jharrellh]

Sponsored Links (Register now to hide all advertisements)

Thanks so much! Turns out mine was a little short, and on closer inspection had been repaired in the past. Ordered a replacement and all went together without drama. Thanks for the help!