The Ford Barn

Big hammer · 04-28-2020, 05:59 PM

A few years ago I came across a brand new A owner, he had his hood open and the firewall, engine, hood was very oily. I noticed that the dip stick was not installed all the way down. I showed him the problem and I installed the dip stick all the way down. The long part of the stick and the short part BOTH need to be in the engine block hole.

Charlie Stephens · 04-28-2020, 07:20 PM

Quote:

Originally Posted by Big hammer

A few years ago I came across a brand new A owner, he had his hood open and the firewall, engine, hood was very oily. I noticed that the dip stick was not installed all the way down. I showed him the problem and I installed the dip stick all the way down. The long part of the stick and the short part BOTH need to be in the engine block hole.

Just an illustration for Mr. Hammers post:

Charlie Stephens

04-28-2020, 05:59 PM	#1
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,638	Re: Question? A few years ago I came across a brand new A owner, he had his hood open and the firewall, engine, hood was very oily. I noticed that the dip stick was not installed all the way down. I showed him the problem and I installed the dip stick all the way down. The long part of the stick and the short part BOTH need to be in the engine block hole. __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode