transmission floor cover

[FrankWest]

Originally Posted by FrankWest

ThaNKS.
i TOOK THE TRANs cover off and can see the steady rods. I have a question, not that I am going to remove them, but what king of a wrench is needed to removed, the bolt has an indentation in its head, or maybe I have a hole in my head. funny the left side steady rod bolt is i inch higher than the right side bolt?
Nothing seems loose. I will get a photo later.

This seems to be a tool to use But why is left side approx 1 in higher than right side?
Maybe defective? the left side screw is almost level with the transmission cove, The right screw is approx 1 inch below the cover?