First Flathead Build

[RalphM]

One of these pry bars will come in awful handy when pulling the horseshoe clips as well.
Once the clip is out you can sometimes pry up on valve from bottom, tap down and repeat, using lots of PB blaster.
Or you can get the other tool here and make the job even easier.

[Tim Ayers]

Originally Posted by RalphM

One of these pry bars will come in awful handy when pulling the horseshoe clips as well.
Once the clip is out you can sometimes pry up on valve from bottom, tap down and repeat, using lots of PB blaster.
Or you can get the other tool here and make the job even easier.

The KD valve tool is an excellent edition to anyone's flathead tool arsenal.