|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
05-16-2018, 03:37 AM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: adding std bypass oil filter
All the supply and return ports are in the block.
The only major difference is how the canister assy. is mounted to the head. Early ( prior to 1950 ) 8BA's mounted using head bolts. The later ones had dedicated bosses cast into the heads. The oil return hole is tapped into the side of the block, above the pan rail.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 05-16-2018 at 09:42 AM. |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 09:08 AM.