The Ford Barn

wga · 07-17-2017, 04:37 PM

Mike, I use both the shop vac method with a rubber hose, and then used a pressure washer with out the sprayer tip on it. Just used the sprayer tube and was able to get a ton of crudola out of it. Also with the heads on, and no thermostat, used a high pressure down the housing and into the block in an effort to wash it out as well.
If you need radiator work, Rick's out in Azusa does excellent work, and knows old Fords.
693 E Arrow Hwy
Azusa, CA 91702
Do you go to the cruise in at Dukes on Wednesday's

07-17-2017, 04:37 PM	#12
wga Senior Member Join Date: Jul 2010 Location: Yorba Linda, CA Posts: 972	Re: Overheating and fed up.... Mike, I use both the shop vac method with a rubber hose, and then used a pressure washer with out the sprayer tip on it. Just used the sprayer tube and was able to get a ton of crudola out of it. Also with the heads on, and no thermostat, used a high pressure down the housing and into the block in an effort to wash it out as well. If you need radiator work, Rick's out in Azusa does excellent work, and knows old Fords. 693 E Arrow Hwy Azusa, CA 91702 Do you go to the cruise in at Dukes on Wednesday's __________________ Henry Ford designed the flathead without the aid of a computer.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode