English Ford Model Y

[FlatheadTed]

I saw one a few months back that had a v8 60 just dropped in it ,it was a un finished project , see if I can get a photo .Ted .

[Flat Ernie]

Originally Posted by FlatheadTed

I saw one a few months back that had a v8 60 just dropped in it ,it was a un finished project , see if I can get a photo .Ted .

If you can, see what they did with the steering. I did some tape-measure engineering on mine - the steering column would come out right smack in the middle of the right head/block area...

[tony starr]

would a cowl steering setup work?

Originally Posted by Flat Ernie

If you can, see what they did with the steering. I did some tape-measure engineering on mine - the steering column would come out right smack in the middle of the right head/block area...

[Flat Ernie]

Originally Posted by tony starr

would a cowl steering setup work?

Perhaps...if you went fenderless...and I don't care for the look of cowl steering on anything but race cars or race-inspired cars.

I think one of those offset chain re-drives might work...

[FlatheadTed]

I think he had the steering box removed you could consider the stock box with a two U joint to go under ,rotate the box anty clock wise HHmmmm . the boxes are most likely ,?? actually the casting can brake , Ted

Originally Posted by Flat Ernie

If you can, see what they did with the steering. I did some tape-measure engineering on mine - the steering column would come out right smack in the middle of the right head/block area...