What paint to use

[chap52]

I also used a 2 part Acrylic Urethane system from www.tcpglobal.com. Go to their site and look at the "custom shop" listed on the left of the page. I also used their primer and prep. This was my first attempt at painting a vehicle and even when using a Harbor Freight $15 hvlp spray gun I loved both the project and the outcome.

[Willit Stop]

If you have the patience,you could do a "stick test". Paint a small area using whatever method you prefer and let it dry for a few days or so. Then stick a layer of tape over it and pull it off. If the paint comes off with the tape,try another method.