34 manifold to stock 32 engine

[dodgeo]

Charlie,
Thanks, but I have a 36 manifold which, as mentioned, has the mounting surface 1" lower than the 34. The 36 manifold has the same generator height mounting as the 34, by the way.
I want to use the 34 manifold as it has the same base design as the 32.
It sounds as if I need the 8.87" high push rod as called for iron manifolds ??
I have seen several 32 engines which use the 34 manifold, so there must be a simple solution.
Dodge Olmsted