The Ford Barn

flatmotor40 · 10-21-2016, 04:54 AM

The only think that hit is the arm that the shift cable hooks to.I put the arm to the bottom and now you push in to engage OD and pull out to disengage.But the 36% works great.

oldford2 · 10-21-2016, 08:54 AM

Quote:

Originally Posted by flatmotor40

The only think that hit is the arm that the shift cable hooks to.I put the arm to the bottom and now you push in to engage OD and pull out to disengage.But the 36% works great.

I had to do that also.

10-21-2016, 04:54 AM	#1
flatmotor40 Senior Member Join Date: May 2010 Location: Georgia Posts: 650	Re: floor pan alterations to install mitchell OD? The only think that hit is the arm that the shift cable hooks to.I put the arm to the bottom and now you push in to engage OD and pull out to disengage.But the 36% works great.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode