The Ford Barn

Charlie ny · 08-11-2016, 08:01 AM

SofaKing,
Here is my take on your situation.......there are no better kits than Daytona
Parts kits. The one issue however is the power valve. The PV functions well and
holds up to corn gas with no issues. The rub is there is no real gasket face on the PV.
As a matter of practice I machine these PV's to create a proper gasket surface
which is square with the threads, flat and exactly the right diameter to trap the
gasket of my design and manufacture. The gasket is integral with the PV.
I will admit to selling a lot of these babies to whom ever wants them.
Charlie ny

08-11-2016, 08:01 AM	#4
Charlie ny BANNED Join Date: May 2010 Posts: 3,019	Re: More Power Valve Questions SofaKing, Here is my take on your situation.......there are no better kits than Daytona Parts kits. The one issue however is the power valve. The PV functions well and holds up to corn gas with no issues. The rub is there is no real gasket face on the PV. As a matter of practice I machine these PV's to create a proper gasket surface which is square with the threads, flat and exactly the right diameter to trap the gasket of my design and manufacture. The gasket is integral with the PV. I will admit to selling a lot of these babies to whom ever wants them. Charlie ny

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode