Mike's A-Fordable oil filter dilemma...HELP!!!

[Benson]

Marshall.

SBC Chevy uses a Fram PH30 From my 500,000 miles driving SBCs.

Thread is 13/16ths-16 threads per inch



FL1A not sure of application this would be a Ford filter, Bill kenz would only deal with Fords:

As I remember this is the filter that Bill Kenz manufactured and (sold me in about 1963) used on the first bypass filter for Model A that mounted in place of side timing gear cover.

They were mostly an aluminum casting with steel inserts for the fittings.

Specs for filter threads are:

3/4-16


BTW 88 Toyota Cressida uses a Fram HP-1,

smaller canister than the Ford or GM filters but same 3/4 16 threads as Ford filter.



Maybe this helps...


HP-1 Fram page:

http://www.framcatalog.com/PartDetail.aspx?b=F&pn=HP1

http://www.framcatalog.com/PartDetail.aspx?b=F&pn=PH30