Head Gasket

[JoeWay]

Originally Posted by MikeK

I vote neither!

There are two new gaskets from "Best" gasket company....You can read about them here: http://www.bestgasket.com/about_our_products.asp

With the known narrow weak spots and seepage problems with the fel-pro, and the blowouts with the modern silicone, I see no reason not to try something else....

I'm with Mike, for the reasons he stated. I installed the Best Graph-Tite last time around. Only got about 500 miles on it, so I can't report long-term results, but I did notice that there was very little change in nut position during the back-it-off-1/8-turn-and-retorques.

Joe