Truck based woody

[GB SISSON]

Originally Posted by Bill

Here is a pic of the upper right rear pillar steel bracket. You'll note it ties in the rear header, upper right roof rail as well as the upper rear side window rail. Make sense? It reduces any lateral movement by tying in the rear upper header. Bill

With my design there isn't room for the lower loop, but I will for sure add the strap across to the rear header. Thanks for the picture! This is gonna seem odd, but I have never really even looked at a ford woodie before I started (or since). I have been dreaming of going to the Lemay antique car museum in Tacoma Wa. and am hoping they have one there. With the ferry and travel time it would be a 2 day trip. Meanwhile I just put away an 8ba that was on my run stand. After repeated running it has better and more even compression numbers. Turns out it's not quite good enough for the woodie, but would be great for the junkyard dog wrecker I want to build from one of the engineless tonners I have. My plan for the woodie is to build up a 59ab with the 3 1/16" bore block I have. It's the one I showed the pictures of the .060 war surplus pistons in cosmoline. Ok, now down to the shop to finish the gussets in the B pillar bracket and add some ears onto the rear one. Thanks all of you for the help, kind words and encouragement.

[AKCJ]

Originally Posted by GB SISSON

This is gonna seem odd, but I have never really even looked at a ford woodie before I started (or since). I have been dreaming of going to the Lemay antique car museum in Tacoma Wa. and am hoping they have one there. With the ferry and travel time it would be a 2 day trip. .

Just google Lemay car collection woodie - you will probably like what you see. We were lucky enough to visit there two years ago when we were down south. Well worth the time and price of admission. Good luck.

[CarlG]

Quote:
Originally Posted by GB SISSON
This is gonna seem odd, but I have never really even looked at a ford woodie before I started (or since). I have been dreaming of going to the Lemay antique car museum in Tacoma Wa. and am hoping they have one there. With the ferry and travel time it would be a 2 day trip. .

Originally Posted by AKCJ

Just google Lemay car collection woodie - you will probably like what you see. We were lucky enough to visit there two years ago when we were down south. Well worth the time and price of admission. Good luck.

When you do go to the LeMay Museum, make sure to see not only the one in downtown Tacoma, but also the one in Parkland at Marymount. It's not as fancy, but has a lot more of Harold's cars.

[GB SISSON]

Originally Posted by CarlG

Quote:
Originally Posted by GB SISSON
This is gonna seem odd, but I have never really even looked at a ford woodie before I started (or since). I have been dreaming of going to the Lemay antique car museum in Tacoma Wa. and am hoping they have one there. With the ferry and travel time it would be a 2 day trip. .




When you do go to the LeMay Museum, make sure to see not only the one in downtown Tacoma, but also the one in Parkland at Marymount. It's not as fancy, but has a lot more of Harold's cars.

Awesome! Now it's a 3 day trip. There's a big weekend coming up where my ex is throwing a bridal shower for our daughter. There will be hens from all over converging on the island. Maybe my youngest son and I can hit the Lemay for that weekend.