The Ford Barn

1931 flamingo · 12-08-2010, 06:43 PM

Lots of info on the EV8 Barn and HAMB for this type of swap, also many use a ford p/up 3 spd w/ o/drive.
Paul in CT

Del in NE Ohio · 07-24-2017, 05:32 AM

I am with CarlG on this one. I have the Tremac 4 speed in my '31 CCPU. Best of both worlds! This past Spring at a swap meet in Marietta, OH, I met a fellow from KY who had purchased Mr. Lewis's tooling, etc. and was now selling those 5 speed kits again. I'll try to find his business card

lmccain · 07-24-2017, 10:23 AM

Valley Machine makes all the T-5 conversion parts needed for the Model A. Open or closed drive line options and even a speedometer adapter
http://www.valleymachineshop.com/model-a-parts.html

12-08-2010, 06:43 PM	#1
1931 flamingo Senior Member Join Date: May 2010 Location: new britain,ct 06052 Posts: 9,428	Re: T5 or T10 swap Lots of info on the EV8 Barn and HAMB for this type of swap, also many use a ford p/up 3 spd w/ o/drive. Paul in CT

07-24-2017, 05:32 AM	#2
Del in NE Ohio Senior Member Join Date: May 2010 Location: Columbiana,OH Posts: 468	Re: T5 or T10 swap I am with CarlG on this one. I have the Tremac 4 speed in my '31 CCPU. Best of both worlds! This past Spring at a swap meet in Marietta, OH, I met a fellow from KY who had purchased Mr. Lewis's tooling, etc. and was now selling those 5 speed kits again. I'll try to find his business card

07-24-2017, 10:23 AM	#3
lmccain Junior Member Join Date: Nov 2010 Posts: 4	Re: T5 or T10 swap Valley Machine makes all the T-5 conversion parts needed for the Model A. Open or closed drive line options and even a speedometer adapter http://www.valleymachineshop.com/model-a-parts.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode