|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
12-03-2015, 06:03 AM
|
#8 |
|
Member Emeritus
Join Date: May 2010
Location: Fitzgerald, Georgia
Posts: 2,204
|
Re: Reconditioned 37 rods
Rub the rod bores with some 400 grit and they will be good. There is a cushion of oil between rod housing and bearing surface. The rod surface should never be in solid contact with the bearing surface. If the oil is not present something else is wrong.
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 09:47 PM.