Bob drake again

[Joe Immler]

What I just CANNOT UNDERSTAND is how these vendors have such problems. Especially the fit of parts. Don't they give the manufacturer a part to look at and measure? It is almost as if they tell the vendor "The front is around 11 and 3/16 or so." Even if they don't have a part and find one on a survivor car the laser, computer etc. measurements should be perfect.

[V8COOPMAN]

Originally Posted by Joe Immler

What I just CANNOT UNDERSTAND is how these vendors have such problems. Especially the fit of parts. Don't they give the manufacturer a part to look at and measure? It is almost as if they tell the vendor "The front is around 11 and 3/16 or so." Even if they don't have a part and find one on a survivor car the laser, computer etc. measurements should be perfect.

I believe our super-secretive Trans-Pacific Partnership should should take care of these kinds of shortcomings pretty quickly, don't ya think? DD